Ruff Tough Dog Kennel FanDog Crates / Kennels, Metal Dog Crates, Plastic Dog Crates, Wire Dog Crates
Out of stock
Ruff Tough Dog Kennel Fan
The heavy duty Ruff Tough Dog Kennel Fan gives you two fan speeds at the flip of a switch for maximum cooling for your dog, or for minimal power draw to conserve your battery. Field tested to withstand weather and vehicle vibration.
Ruff Tough Kennel Fans connect to the 12 volt cigarette lighter plug in your vehicle, and can easily be mounted on a wide variety of kennel doors and surfaces. Mounting hardware is included. The LOW setting draws only 1.6 amps, so you can leave your fan on even when your vehicle is not without worry. Dogs find the white noise from the fan very soothing, and the continuous air flow through the kennel cuts down on flies and mosquitoes.
Includes approx. 9 1/2 ft. cigarette lighter vehicle power adapter. If you want to connect your fan to your trailer power connector, a 7-Pin Power Cable and a 7-Pin Power Cable with 4-Pin Trailer Connector are available separately.
1 year manufacturer warranty.
- Approx. Dimensions (w/ frame): 8″W x 12″H x 3″D
- Power Usage: 12 VDC, 1.6 amps on low, 2.0 on high
- Airflow: 550 CFM* on low, 825 CFM on high
*CFM is a standard measurement of airflow that indicates how many cubic feet of air passes by a stationary point in one minute. The higher the number, the more air is being forced through the system. For example, a large Ruff Tough crate is approximately 12 cubic feet, so this fan on low is capable of completely replacing that volume of air 45 times in 1 minute.
Ruff Tough Kennel Crate Water TopperSKU: TT2009-1$154.95
Ruff Tough Kennel Crate Water Topper
Dakota 283 Kennebec Dog Kennel – Dog CrateSKU: 6688982f5cfaAVAILABLE$208.99
This rugged crate is molded as a single unit that will not split, crack, or break apart like most every other crate on the market.
Dakota 283 Kennebec Kennel G3 Medium Dog Kennel ...SKU: bcc3300cfddcAVAILABLE$209.99
Dakota 283 brings yet another solid kennel to the game with the line of G3 crates. Each one is created using the rotational molding process which forms a single-shell product that will flex slightly but resist surface abrasions and extreme impacts.