Improving your shotgun patterns with Kicks Choke Tubes the highest quality precision machined diagonally-ported tubes on the market!
Kicks line of directional diagonally-ported chokes for hunting and competition significantly increase pattern performance (15% to 20% density), and reduce muzzle jump and felt recoil. All of our chokes are roll-marked externally for quick choke identification and don’t require a wrench for installation or removal.
Porting is machined at an angle of 135 degrees away from the shooter, reducing side blast prevalent in ports 90 degrees or less.
Competition Grade Chokes
Their competition chokes (12 & 20 gauges) for skeet trap sporting clays and FITASC are finished in polished stainless steel and our hunting chokes (10, 12 & 20 gauge) have a black matte finish.
Faster Wad Separation
Because of its sharp angle, the inside forward lip “grabs”, stabilizes and slows the wad for faster separation of wad
and shot column. This feature combined with a parallel section where the constriction is held constant produces great patterns.
The external portion extends approximately 1 1/2″ from the muzzle and isn’t noticeable when shooting.
High Flyer Kicks Choke
Whether you’re after distant geese, decoying ducks, a tight holding covey of quail or a ring-neck in a cornfield, Kicks has a “High Flyer” choke perfect for any hunting/shooting situation. Every “High Flyer” choke is designed to shoot lead, steel, tungsten, hevi-shot, or any non-toxic shot.
“High Flyer” chokes are offered in four sizes for 10 and 12ga. shotguns and three sizes for 20ga.
Kicks Vortex – Black Cloud Choke Tube
Kicks “Vortex” chokes are a culmination of months of engineering & pattern testing delivering dense, uniform patterns shooting Federal “Black Cloud” ammo.
“Vortex” chokes are available in Improved Cylinder, Modified, Full & XFull constrictions.
When using loads other than “Black Cloud” you would be better off using the “Kicks High Flyer” choke tube for best performance.
You can imagine that when these three powerhouses in the waterfowl industry came together that nothing but the best results were to expected! Then adding the seal of approval of Phil Robertson, the Duck Commander, you know it is the Real Deal!
Federal “Black Cloud” ammo “Drops ducks like rain” & Kicks “Vortex” choke tubes “Create the Perfect Storm”!
Gobblin’ Thunder Choke Tube
The world’s most well-known turkey choke!
“Gobblin’ Thunder” turkey chokes are the original extended-ported chokes that set the bar for every other choke tube on the market.
Kick’s chokes are manufactured from the highest quality 17-4PH stainless steel and have a matte-black finish.
“Gobblin Thunder” chokes extend from the barrel approximately 1 3/8″ and are angle ported to reduce recoil and deliver extremely tight and consistent pattern performance.
These chokes easily convert most 10, 12, 16 and 20ga. factory threaded barrels from a mild mannered bird gun into a turkey hunting machine!
“Gobblin Thunder” chokes are not recommended for steel shot or Hevi-shot.
Please refer to the recommendation chart to match your gun and shot size to find the perfect choke for your set-up.
Buck Kicker Choke Tube
“BuckKicker” chokes are available in three constrictions to accommodate buckshot sizes from.000 to #4 buck.
Chokes are manufactured from 17-4PH stainless steel and come with a matte-black finish.
“BuckKicker” chokes are available for most 10,12 and 20 gauge models. “BuckKicker” chokes can also be used for upland game whenever a full choke is required.
Not for use with steel shot. With the right match of choke to your gun, consistent patterns inside a 20″ circle at 40 yards can be achieved.
Recommended shot size use:
Light Full–000 Buckshot
Full–Best all-around 00 Buckshot
Xfull–2 3/4 or 3″ 00 Buckshot–#1 & #4 Buckshot
Kicks Howler Choke Tube
Kick’s Industries is proud to introduce the new “Howler” predator chokes.
The “Howler” is specifically designed for predator/coyote hunting.
The “Howler” will deliver very tight patterns at long distances. You can expect a 20″ to 25″ pattern at 40 yards.
“Howler” chokes are offered in two sizes. The “Howler H” is designed for the HeviShot “Dead Coyote” loads
while the “Howler L” is designed to be used with either coated or non-coated lead buckshot, specifically #1 or #4 buckshot.
“Howler” chokes feature the Kick’s extended/ported design and are manufactured in the USA using PH17-4 grade stainless steel with a blackened finish.
“Howler” chokes are currently available for most 12g shotguns.
Kicks Smoke Competition Choke Tube
The Kicks “Smoke” competition line is available in almost every conceivable constriction including negative constrictions (more open than your bore diameter) through mag full to fulfill the needs of all the clay target sports, skeet trap, five stand and FITASC.
Current inventory includes chokes machined from 17.4 stainless steel with a polished finish.
Like all there chokes, these are engraved & externally laser marked for fast choke identification and do not require a choke wrench for installation or removal!
Shotgun Choke Tube Patterning Tips
- Always Use a Good Rest
- Make sure your target is large enough to accept your entire shit pattern
- Shoot multiple targets – Shoot multiple targets in order to get a true picture of the pattern your gun is producing.
- Try different brands of shells as they will produce different results
- Know your guns capabilities before going into the field
- Keep in mind that a choke that is too tight is just as bad as a choke that is not tight enough.
Kicks Choke Tubes have helped close the deal on thousands of encounters over the years! If it’s Duck or Goose hunting, harvesting that big Tom Turkey, taking down that pesky Coyote or that next competition shoot, Kicks has the choke that will produce the pattern you need for the job at hand!
Joe Scarpy – Owner